Premium Mixed Bed Resin – Refill Bag - 4.5L | High-clean Pure Water HCPW557
Premium Mixed Bed Resin – Refill Bag - 4.5L | High-clean Pure Water HCPW557 is backordered and will ship as soon as it is back in stock.
Delivery time:
Valid for telescopic poles with an all-round brush, five-sided brush, gutter cleaner and/or washer squeegee set.
Product information
Premium Mixed Bed Resin Refill Bag - for your High-clean Pure Water HCPW557
Do you own the High-clean Pure Water HCPW557 and does the resin need replacing? With this 4.5-liter refill bag, you can refill your device. This powerful premium mixed bed resin filters minerals such as limescale and salt from the water through deionization (DI). This process is also called demineralization and ensures spotless results without drying.
How often should you replace the resin?
Example: cleaning an average house with a telescopic brush takes about 20 minutes. The brush uses around 4 liters per minute, so about 80 liters per cleaning. One bag is good for approximately 500 liters, which equals about six cleaning sessions. Cleaning once every two months means one bag lasts about a year. Note: water quality differs by region. The example above is based on measurements and test usage using inlet water of 190 ppm. Results may therefore vary depending on your tap water. You can easily measure the result with the TDS meter supplied with your device.
Note: Filtered water is not suitable for drinking!
Features:
Filters tap water into 100% pure water for spotless cleaning
1 bag of mixed bed resin (4.5L) filters approx. 500 liters of water
Suitable for windows, vehicles, frames, fascias and solar panels
Suitable for High-clean Pure Water HCPW557
Specifications
-
Materiaal-
Each section should remain retracted by 20–30 cm for greater stability, strength, and less bending.
When the pole is fully extended and held upwards at a 60-degree angle, the weight increases significantly. We call this the perceived weight and have calculated it for each pole.
Onze klant reacties
Others also viewed
View allFewer sections, less bending
The greatest amount of bending in a telescopic pole is caused by the transitions between the sections. That is why, at High-Clean, we have designed the pole with as few sections as possible. This makes the pole as rigid and stable as possible.

